SuperServer 5039MS-H8TRF

Key Features (per node)
• Cloud Computing
• Web Cache
• Web Hosting, VM
• Social Networking

1. Single socket H4 (LGA 1151) supports
    Intel® Xeon® processor E3-1200 v6/v5,
    Intel® 7th/6th Gen. Core™ i3 series,
    Intel® Celeron® and Intel® Pentium®

2. 2x 3.5″ SATA3 by default’ 2x 2.5″
    SATA3 HDDs w/ Optional kits

3. Up to 64GB ECC UDIMM
    DDR4-2400MHz in 4 sockets

4. 2 GbE LAN ports via Intel i350,
    1 dedicated IPMI LAN port

5. 1 PCI-E 3.0 x8 and 1 Micro-LP

6. 2 USB 2.0, 1 VGA, 1 COM port,
    (with KVM dongle)

7. 1 USB 3.0 (Type A), 1 SATA DOM

8. 4 heavy duty hot-swap 8cm fans with
    optimal cooling zone (per system)

9. 1600W Redundant power supplies
    Titanium Level Certified (per system)

SuperServer: SYS-5039MS-H8TRF (Black)
CPU: Single Socket H4 (LGA 1151) supports:Intel® Xeon® processor E3-1200 v6/v5, Intel® 7th/6th Gen Core™ i3, Intel® Pentium®, Intel® Celeron® processorsCPU TDP up to 80W
Note: BIOS version 2.0 or above is required to support Intel® Xeon® Processor E3-1200 v6 series or 7th Generation Intel® Core™ Processors
Memory Capacity: 4x 288-pin DDR4 DIMM slots Supports up to 64 GB DDR4 ECC Un-Buffered memory (UDIMM)
Memory Type: 2400MHz/2133MHz ECC DDR4 SDRAM 72-bit, 288-pin gold-plated UDIMMs
DIMM Sizes: 16GB, 8GB, 4GB
Memory Voltage: 1.2 V
Error Detection: Corrects single-bit errors Detects double-bit errors (using ECC memory)
PCI-Express: 1 PCI-E 3.0 x8 Low-profile slot 1 Micro-LP for Dual GbE (pre-installed)’ 10GbE or IB AOC optional
Micro-LP NIC: Intel® i350 GbE controller Dual RJ-45 connectors Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Intel® I/O Acceleration Technology (I/O AT) MicroLP Adapter Matrix (Networking options)
Chipset: Intel® C236 chipset
SATA: SATA3 (6Gbps) via C236 controller
IPMI: Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM over LAN support ASPEED AST2400 BMC
Headers: 1x Type A USB 3.0
Graphics: ASPEED AST2400 Graphics (BMC with Graphic controller)
SATA: 2 SATA3 (6Gbps) ports
LAN: 2 RJ45 Gigabit Ethernet LAN ports 1 RJ45 Dedicated IPMI LAN port
DOM: SATA DOM (Disk on Module) power connector support
KVM: 1 VGA, 1 COM and 2 USB 2.0 (with KVM dongle)
BIOS Type: 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features: DMI 2.3 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3
Switch: Power / UID
Form Factor: 3U
Model: CSE-938BH-R1K68B
Height: 5.21″ (132.5 mm)
Width: 17.26″ (438.4 mm)
Depth: 23.2″ (589 mm)
Package: 11.65″ (H) x 26.26″ (W) x 34″ (D)
Weight: Net Weight: 62.2 lbs (28.21 kg) Gross Weight: 88 lbs (39.92 kg)
Color: Black
Buttons: Power On/Off button
LEDs: Power LED Node status LED
Internal: 2 Hot-swap 3.5″ SATA3 (6Gbps) HDDs per node (or 2x 2.5″ SATA3 with optional kits)’ up to 16 HDDs total Enterprise SATA HDD only recommended
Fans: 4 Heavy duty 8cm fans with optimal cooling zone
Total Output Power: 800W: 100 – 140Vac1600W: 180 – 240Vac
Dimension(W x H x L): 76 x 40.4 x 336 mm
Input: 100-140Vac / 10-7A / 50-60Hz 180-240Vac / 11-8A / 50-60Hz
+12V: Max: 67A / Min: 0A (100-140Vac) Max: 133A / Min: 0A (180-240Vac)
+5Vsb: Max: 1A / Min: 0A
Output Type: 27 Pairs Gold Finger Connector
Certification:   Titanium Level  [ Test Report ]
CPU: Monitors for CPU Cores, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages. 3-Phase-switching voltage regulator with auto-sense from 0.5V-2.3V
FAN: Cooling zone
Temperature: Monitoring for CPU and chassis environment
RoHS: RoHS Compliant
Environmental Spec.: Operating Temperature:    10°C to 35°C (50°F to 95°F)Non-operating Temperature:   -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity:   8% to 90% (non-condensing) Non-operating Relative Humidity:   5% to 95% (non-condensing)

Форма заявки