SuperServer 1029TP-DC1R

SYS-1029TP-DC1R: SuperServer 1029TP-DC1R (Black)
CPU: Dual Socket P (LGA 3647) 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors ,Dual UPI up to 10.4GT/s Support CPU TDP 70-145W (Consult with SYS PM for higher CPU TDP Supports)
Cores: Up to 28 Cores
Note: *Processors ending N or S are optimized for networking and storage applications. Customer need POC their application and observe any thermal throttling before large deployment.
Note: BIOS version 3.2or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R)
Memory Capacity: 16 DIMM slots Up to 4TB 3DS ECC DDR4-2933MHz† RDIMM/LRDIMM
Memory Type: 2933†/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note: † 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Chipset: Intel® C621 chipset
SAS: Broadcom 3108 SAS3 (12Gbps) controller’    RAID 0, 1, 5, 6, 10, 50, 60 support Optional SuperCap
Network Controllers: Barebones and Complete System must have at least oneSIOM card installed per node
IPMI: Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics: ASPEED AST2500 BMC
SAS: 4 SAS3 (12Gbps) ports
LAN: 1 RJ45 Dedicated IPMI LAN port
USB: 2 USB 3.0 ports (rear)
VGA: 1 VGA port
Serial Port / Header: 1 Fast UART 16550 port / 1 Header (internal)
Others: 2 SuperDOM support on the motherboard. SuperDOM is for OS boot.
BIOS Type: AMI 32MB SPI Flash ROM
Software: Intel® Node Manager IPMI 2.0 KVM with dedicated LAN NMI SSM, SPM, SUM SuperDoctor® 5 Watchdog
Power Configurations: ACPI Power Management
CPU: Monitors for CPU Cores, Chipset Voltages, Memory. 4+1 Phase-switching voltage regulator
FAN: Fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors
Temperature: Monitoring for CPU and chassis environment Thermal Control for fan connectors
Form Factor: 1U Rackmount
Model: CSE-809H-R1K05P3
Width: 17.2″ (437mm)
Height: 1.7″ (88mm)
Depth: 28.25″ (718mm)
Package: 29.6″ (W) x 8″ (H) x 38.4″ (L)
Weight: Gross Weight: 48.1 lbs (21.9 kg) Net Weight: 33.5 lbs (15.2 kg)
Buttons: Power On/Off button UID button
LEDs: Power status LED HDD activity LED Network activity LEDs Universal Information (UID) LED
PCI-Express: 2 PCI-E 3.0 x16 Low-profile slots 1 SIOM card support Note: Barebones and Complete System must bundle withSIOM(With only one CPU installed, SXB2 M.2 and SXB4 riser card slots not function)
Hot-swap: 4 Hot-swap 2.5″ SAS3/SATA3 drive bays
Fans: 3 Heavy duty counter rotating fans with air shroud and optimal fan speed control
Total Output Power: 800W: 100 – 127Vac1000W: 200 – 240Vac
Dimension(W x H x L): 38 x 40 x 360 mm
Input: 100-127Vac / 9-7.5A / 50-60Hz 200-240Vac / 6-5A / 50-60Hz
+12V: Max: 66.7A / Min: 0A (100-127Vac) Max: 83A / Min: 0A (200-240Vac)
+5Vsb: Max: 4A / Min: 0A
Output Type: Gold Finger Connector (16 Power Pin, 14 Signal Pin)
Certification:   Titanium Level  [ Test Report ]
RoHS: RoHS Compliant
Environmental Spec.: Operating Temperature:    10°C ~ 35°C (50°F ~ 95°F)Non-operating Temperature:   -40°C to 60°C (-40°F to 140°F) Operating Relative Humidity:   8% to 90% (non-condensing) Non-operating Relative Humidity:   5% to 95% (non-condensing)