SuperStorage 6049P-E1CR60L+

SSG-6049P-E1CR60L+: SuperStorage 6049P-E1CR60L+ (Black)
CPU: Dual Socket P (LGA 3647) 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors ,3 UPI up to 10.4GT/s Support CPU TDP 70-205W
Cores: Up to 28 Cores
Note: BIOS version 3.2or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R)
Memory Capacity: 24 DIMM slots Up to 6TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM Supports Intel® Optane™ DCPMM
Memory Type: 2933 /2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note: 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro Cascade Lake only. Contact your Supermicro sales rep for more info.
Chipset: Intel® C621 chipset
SAS: SAS3 (12Gbps) via Broadcom 3616 AOC’ IT Mode, x16 SAS Controller
SATA: SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI: Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics: ASPEED AST2500 BMC
Serial ATA: 4 SATA3 (6Gbps) ports
LAN: 1 RJ45 Dedicated IPMI LAN port
USB: 2 USB 3.0 ports (rear) 1 Type A
VGA: 1 VGA D-Sub connector port
Serial Port / Header: 1 Fast UART 16550 port / 1 Header
BIOS Type: AMI UEFI
Software: Intel® Node Manager IPMI 2.0 NMI SSM, SPM, SUM SuperDoctor® 5 Watchdog
CPU: Monitors for CPU Cores, Chipset Voltages, Memory. 4+1 Phase-switching voltage regulator
FAN: Fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors
Temperature: Monitoring for CPU and chassis environment Thermal Control for fan connectors
Form Factor: 4U Rackmount
Model: CSE-946STS-R2K05P
Width: 17.2″ (437mm)
Height: 7″ (178mm)
Depth: 30.2″ (767mm)
Package: 33.25″ (W) x 28″ (H) x 42.5″ (D)
Weight: Gross Weight: 172.5 lbs (78.24kg) Net Weight: 120 lbs (54.43 kg)
Available Colors: Black
Buttons: Power On/Off button System Reset button
LEDs: Power status LED Hard drive activity LED Network activity LEDs System Information LED Power fail LED
PCI-Express: 2 PCI-E 3.0 x16 slots 1 PCI-E 3.0 x8 slot 1SIOM card support(must bundle with network card)
Hot-swap: 60 Hot-swap 3.5″ SAS3/SATA3 drive bays 2 Rear Hot-swap 2.5″ SATA drive bays
Optional: 6 NVMe bays (optional)
Fans: 5 Hot-swap 8cm rear exhaust PWM fans
Total Output Power: 1000W: 100 – 120Vac 1800W: 200 – 220Vac 1980W: 220 – 230Vac 2000W: 230 – 240Vac 2000W: 200 – 240Vac (UL/CUL only)
Dimension(W x H x L): 73.5 x 40 x 265 mm
Input: 100-120Vac / 12.5-9.5A / 50-60Hz 200-220Vac / 10-9.5A / 50-60Hz 220-230Vac / 10-9.8A / 50-60Hz 230-240Vac / 10-9.8A / 50-60Hz 200-240Vac / 11.8-9.8A / 50-60Hz (UL/cUL only)
+12V: Max: 83.3A / Min: 0A (100-120Vac) Max: 150A / Min: 0A (200-220Vac) Max: 165A / Min: 0A (220-230Vac) Max: 166.7A / Min: 0A (230-240Vac) Max: 166.7A / Min: 0A (200-240Vac) (UL/cUL only)
12Vsb: Max: 2.1A / Min: 0A
Output Type: 25 Pairs Gold Finger Connector
Certification:   Titanium Level  [ Test Report ]
RoHS: RoHS Compliant
Environmental Spec.: Operating Temperature:    10°C ~ 35°C (50°F ~ 95°F)Non-operating Temperature:   -40°C to 60°C (-40°F to 140°F) Operating Relative Humidity:   8% to 90% (non-condensing) Non-operating Relative Humidity:   5% to 95% (non-condensing)