SuperStorage 2029P-E1CR48H

SSG-2029P-E1CR48H: SuperStorage 2029P-E1CR48H (Black)
CPU: Dual Socket P (LGA 3647) 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors ,3 UPI up to 10.4GT/s Support CPU TDP 70-165W
Cores: Up to 28 Cores
Note: BIOS version 3.2or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R)
Memory Capacity: 24 DIMM slots Up to 6TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM Supports Intel® Optane™ DCPMM
Memory Type: 2933 /2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note: 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro Cascade Lake only. Contact your Supermicro sales rep for more info.
Chipset: Intel® C621 chipset
SAS: SAS3 (12Gbps) via Broadcom 3108′ HW RAID RAID 0, 1, 5, 6, 10, 50, 60
SATA: SATA3 (6Gbps)’ RAID 0, 1, 5, 10, 50
IPMI: Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Video: ASPEED AST2500 BMC
Serial ATA: 8 SATA3 (6Gbps) ports
LAN: 1 RJ45 Dedicated IPMI LAN port
USB: 2 USB 3.0 ports (rear) 1 Type A
Video: 1 VGA D-Sub connector port
Serial Port / Header: 1 Fast UART 16550 port / 1 Header
BIOS Type: AMI UEFI
Software: Intel® Node Manager IPMI 2.0 KVM with dedicated LAN NMI SSM, SPM, SUM SuperDoctor® 5 Watchdog
CPU: Monitors for CPU Cores, Chipset Voltages, Memory. 4+1 Phase-switching voltage regulator
FAN: Fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors
Temperature: Monitoring for CPU and chassis environment Thermal Control for fan connectors
Form Factor: 2U Rackmount
Model: CSE-226STS-R1K62P1
Width: 17.2″ (437mm)
Height: 3.5″ (89mm)
Depth: 30.2″ (767mm)Cable Management Arm installed: 35.2″ (895mm)
Gross Weight: 65 lbs (29.5 kg)
Available Colors: Black
Buttons: Power On/Off button System Reset button
LEDs: Power status LED Hard drive activity LED Network activity LEDs System Information LED Power fail LED
PCI-Express: 2 PCI-E 3.0 x16 slots 1 PCI-E 3.0 x8 slot 1 PCI-E 3.0 x8 + x8 for SAS3 Add-On-Module (AOM) 1SIOM card support (flexible networking)
Hot-swap: 48 Hot-swap 2.5″ SAS3/SATA3 drive bays 2 Hot-swap 2.5″ SATA3 drive bays (rear)
Fans: 5x 8cm high-performance PWM fans
Total Output Power: 1600W/1000W
Dimension(W x H x L): 73.5 x 40 x 203 mm
Input: 100-127Vac / 13 — 9A / 50-60Hz 200-240Vac / 10 — 8A / 50-60Hz
+12V: Max: 83.3A / Min: 0A (100-127Vac) Max: 133A / Min: 0A (200-240Vac)
12Vsb: Max: 2.1A / Min: 0A
Output Type: 25 Pairs Gold Finger Connector
Certification:   Titanium Level  [ Test Report ]
RoHS: RoHS Compliant
Environmental Spec.: Operating Temperature:    10°C ~ 35°C (50°F ~ 95°F)Non-operating Temperature:   -40°C to 60°C (-40°F to 140°F) Operating Relative Humidity:   8% to 90% (non-condensing) Non-operating Relative Humidity:   5% to 95% (non-condensing)