SuperServer 1019S-MC0T

SYS-1019S-MC0T: SuperServer 1019S-MC0T (Black)
CPU: Single Socket H4 (LGA 1151) supports:Intel® Xeon® processor E3-1200 v6/v5, Intel® 7th/6th Gen Core™ i3, Intel® Pentium®, Intel® Celeron® processorsCPU TDP up to 80W
Note: BIOS version 2.0 or above is required to support Intel® Xeon® Processor E3-1200 v6 series or 7th Generation Intel® Core™ Processors
Memory Capacity: 4x 288-pin DDR4 DIMM slots Up to 64GB DDR4ECC UDIMM
Memory Type: 2400/2133/1866/1600MHzECC DDR4 SDRAM 72-bit,288-pin(UDIMM) gold-plated DIMMs
DIMM Sizes: 16GB, 8GB, 4GB
Memory Voltage: 1.2 V
Error Detection: Corrects single-bit errors Detects double-bit errors (using ECC memory)
Chipset: Intel® C236 chipset
SATA: SATA3 (6 Gbps) via C236 controllerRAID 0, 1, 5, 10
SAS: Broadcom 3008 SAS3 (12Gbps) controller’ SW RAID 0, 1, 10
IPMI: Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC
Network Controllers: Dual Intel® X550 10GBase-T LAN ports Virtual Machine Device Queues reduce I/O overhead Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Video: ASPEED AST2400 BMC
SATA: 8 SATA3 (6Gbps) ports
SAS: 8 SAS3 (12Gbps) ports
LAN: 2 RJ45 10GBase-T LAN ports 1 RJ45 Dedicated IPMI LAN port
USB: 5 USB 3.0 ports (2 rear + 2 headers + 1 Type A) 6 USB 2.0 ports (2 rear + 4 headers)
Video: 1 VGA port
Serial Port / Header: 2 COM ports (1 rear, 1 header)
SuperDOM: 2 SuperDOM (Disk on Module) ports with built-in power
Voltage: Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
FAN: Total of 6 fan headers supporting up to 6 fans4 fans with tachometer status monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control Pulse Width Modulated (PWM) fan connectors
Temperature: Monitoring for CPU and chassis environment CPU thermal trip support I2C temperature sensing logic Thermal Monitor 2 (TM2) support PECI
LED: System Information LED Suspend static indicator LED UID/Remote UID
Other Features: Chassis intrusion detection Chassis intrusion header RoHS, Halogen Free
Form Factor: 1U Rackmount
Model: CSE-113MFAC2-341CB
Height: 1.7″ (43mm)
Width: 17.2″ (437mm)
Depth: 19.98″ (507mm)
Package: 8.5″ (H) x 24″ (W) x 29.5″ (D)
Weight: Gross Weight: 31 lbs (14.1 kg) Net Weight: 18.5 lbs (8.4 kg)
Available Colors: Black
Buttons: Power On/Off button System Reset button
LEDs: Power LED Hard drive activity LED 2 Network activity LEDs System Information LED
PCI-E: 1 PCI-E 3.0 x8
M.2: 1x M.2 Interface: SATA and PCI-E 3.0 x4 Form Factor: 2260 Key: M-Key Double Height Connector
Hot-swap: 8 Hot-swap 2.5″ SAS/SATA3 drive bays
Fans: 4x 4cm chassis internal fanOptional 2x 40x28mm PWM fan
AC Voltage: 100-240 V, 50-60 Hz, 4.2-1.8 Amp
+5V: Max: 16 Amp / Min: 0.5A
+12V: Max: 28 Amp / Min: 0.5A
+3.3V: Max: 15 Amp
+5V standby: Max: 3 Amp
-12V: Max: 0.5 Amp
Certification:     Platinum Level 
BIOS Type: 8MB SPI Flash EEPROM with AMI BIOS
RoHS: RoHS Compliant
Environmental Spec.: Operating Temperature:    10°C to 35°C (50°F to 95°F)Non-operating Temperature:   -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity:   8% to 90% (non-condensing) Non-operating Relative Humidity:   5% to 95% (non-condensing)