MBD-H11DSi: H11DSi
MBD-H11DSi-B: H11DSi (Bulk Pack)
Form Factor: E-ATX
Dimensions: 12″ x 13.05″ (30.5cm x 33.1cm)
CPU: Dual AMD EPYC™ 7001/7002* series Processors (*Board revision 2.x required) Socket SP3 Up to 240W TDP
Cores: Up to 32 Cores Up to 64 Cores (Board revision 2.x required)
Chipset: System on Chip
Memory Capacity: 16 DIMM sockets Supports up to 2TB Registered ECC DDR4 2666MHz SDRAM in 16 DIMMs Supports up to 4TB Registered ECC DDR4 3200MHz SDRAM (Board revision 2.x required) 8-channel memory bus
Memory Type: DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs (Board revision 2.x required)
DIMM Sizes: 8GB, 16GB, 32GB, 64GB, 128GB, 256GB* (*Board revision 2.x required)
Memory Voltage: 1.2V
Error Detection: Corrects single-bit errors Detects double-bit errors (using ECC memory)
SATA: SATA3 (6 Gbps)
IPMI: Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2500 BMC
Network Controllers: 2 1GbE LAN via Intel® i350-AM21 1 Realtek RTL8211E PHY (dedicated IPMI)
VGA: ASPEED AST2500 BMC
SATA: 10 SATA3 (6 Gbps) ports
LAN: 2 RJ45 Gigabit Ethernet LAN ports 1 RJ45 Dedicated IPMI LAN port
USB: 2 USB 3.0 ports (rear) 4 USB 2.0 ports (2 rear + 2 via header)
VGA: 1 VGA port
Others: 1 COM port (rear) 2 SATA DOM power connector1 TPM 2.0 header
PCI-Express: 3 PCI-E 3.0 x8 2 PCI-E 3.0 x16
M.2: Interface: 1 SATA/PCI-E 3.0 x2 (Platform with EPYC 7002 processor only supports PCI-E type M.2 module) Form factor: 2280, 22110 Key: M-key
2U: SC213AC-R1K23LPB SC216BE1C4-R1K23LPB SC825TQC-R802LPB SC826BE1C4-R1K23LPB SC829HE1C4-R1K62LPB
3U: SC836BE1C-R1K23B
4U: SC745BAC-R1K28B2 SC846BE1C-R1K23B
BIOS Type: AMI 128Mb SPI Flash EEPROM
BIOS Features: Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 5.1 USB Keyboard Support SMBIOS 3.1.1
Software: Super Doctor 5 Watch Dog NMI SUM IPMI 2.0, KVM with dedicated LAN
Power Configurations: ACPI Power Management Power-on mode control for AC power loss recovery
CPU: Monitors CPU Core Voltages, +1.5V, +1.8V, +12V +5V, +5V standby CPU switching voltage regulator Supports system management utility VBAT
FAN: Up to 8-fan status tachometer monitoringUp to eight 4-pin fan headersDual Cooling Zone Status monitor for speed control Pulse Width Modulated (PWM) fan connectors
Temperature: Monitoring for CPU and chassis environment CPU Thermal Trip Support Thermal control for 8x Fan connectors I2C Temperature Sensing Logic
LED: CPU / System Overheat LED
Other Features: Chassis Intrusion Detection Chassis Intrusion Header UID
Environmental Specifications: Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)
