MBD-H11SSL-NC: H11SSL-NC
MBD-H11SSL-NC-B: H11SSL-NC (Bulk Pack)
MBD-H11SSL-NC-O: H11SSL-NC (Retail Pack)
Form Factor: ATX
Dimensions: 12″ x 9.6″ (30.5cm x 24.4cm)
CPU: Single AMD EPYC™ 7001/7002* series Processor (*Board revision 2.x required) Socket SP3
Cores: Up to 32 Cores Up to 64 Cores (Board revision 2.x required)
Chipset: System on Chip
Memory Capacity: 8 DIMM slots Supports up to 1TB Registered ECC DDR4 2666MHz SDRAM in 8 DIMMs Supports up to 2TB Registered ECC DDR4 3200MHz SDRAM (Board revision 2.x required) 8-channel memory bus
Memory Type: DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs (Board revision 2.x required)
DIMM Sizes: 8GB, 16GB, 32GB, 64GB, 128GB, 256GB* (*Board revision 2.x required)
Memory Voltage: 1.2V
Error Detection: Corrects single-bit errors Detects double-bit errors (using ECC memory)
SATA: SATA3 (6 Gbps)
SAS: Broadcom 3008 SAS3 (12 Gbps) controller RAID 0, 1, 10
IPMI: Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2500 BMC
Network Controllers: 2 1GbE LAN via Intel® I210 1 Realtek RTL8211E PHY (dedicated IPMI)
VGA: ASPEED AST2500 BMC
SAS: 8 SAS3 (12 Gbps) ports
SATA: 8 SATA3 (6 Gbps) ports
NVMe: 2 PCI-E 3.0 NVMe x4 Internal Ports
LAN: 2 RJ45 Gigabit Ethernet LAN ports 1 RJ45 Dedicated IPMI LAN port
USB: 5 USB 3.0 ports(2 rear + 2 via header + 1 Type A) 4 USB 2.0 ports (2 rear + 2 via header)
VGA: 1 VGA port
Others: 1 COM port (rear) 2 SATA DOM power connector1 TPM 2.0 header
PCI-Express: 3 PCI-E 3.0 x8 3 PCI-E 3.0 x16
M.2: Interface: PCI-E 3.0 x4 Form factor: 2280, 22110 Key: M-key
1U: SC813MFTQC-350CB2 SC813MFTQC-R407CB
2U: SC213AC-R1K23LPB SC216BE1C4-R1K23LPB SC825TQC-R740LPB SC826BE1C4-R1K23LPB
3U: SC836BE1C-R1K23B
4U: SC745BAC-R1K28B2 SC846BE1C-R1K23B
BIOS Type: AMI 128Mb SPI Flash EEPROM
BIOS Features: Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 5.1 USB Keyboard Support SMBIOS 3.1.1
Software: Super Doctor 5 Watch Dog NMI SUM IPMI 2.0, KVM with dedicated LAN
Power Configurations: ACPI Power Management Power-on mode control for AC power loss recovery
CPU: Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, +5V standby, +3.3V standby CPU switching voltage regulator Supports system management utility VBAT
FAN: Up to 7-fan status tachometer monitoringUp to 7 4-pin fan headersDual Cooling Zone Status monitor for speed control Pulse Width Modulated (PWM) fan connectors
Temperature: Monitoring for CPU and chassis environment CPU Thermal Trip Support Thermal control for 7x Fan connectors I²C Temperature Sensing Logic
LED: CPU / System Overheat LED
Other Features: Chassis Intrusion Detection Chassis Intrusion Header UID
Environmental Specifications: Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)
