MBD-H12SSG-ANP6: H12SSG-ANP6 (for server SKUs only)
Form Factor: Proprietary
Dimensions: 9.6″ x 14.5″
CPU: Single AMD Ryzen™ Threadripper™ PRO 5000WX/3000WX Series Processor Socket SP3
Cores: Up to 64 Cores
Chipset: System on Chip
Memory Capacity: 8 DIMM slots Supports up to 2TB Registered ECC DDR4 3200MHz SDRAM in 8 DIMMs 8-channel memory bus
Memory Type: DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs
DIMM Sizes: 8GB, 16GB, 32GB, 64GB, 128GB, 256GB
Memory Voltage: 1.2V
Error Detection: Corrects single-bit errors Detects double-bit errors (using ECC memory)
IPMI: Support for Intelligent Platform Management Interface v. 2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2600 BMC
Network Controllers: LAN Networking provided via AIOM Dedicated IPMI via Realtek RTL8211F PHY
VGA: ASPEED AST2600 BMC
NVMe: 2 NVMe via SlimSAS
LAN: Provided via AIOM 1 RJ45 Dedicated IPMI LAN port
USB: 2 USB 3.0 ports (rear)
VGA: 1 VGA port (rear)
Others: 1 COM port (header) 1 TPM 1.2/2.0 header
PCI-Express: 3 PCI-E 4.0 x16 Riser Slots 9 PCI-E 4.0 x8 SlimSAS 2 PCI-E 4.0 x4 SlimSAS 1 PCI-E 4.0 x16 AIOM LAN Networking Slot
M.2: Interface: 2 PCI-E 4.0 x4 Form Factor: 2242, 2260, 2280, 22110 Key: M-key
2U: SC227GTS-R2K63P
Model(s): AS -2114GT-DPNR
BIOS Type: AMI 256Mb SPI Flash EEPROM
BIOS Features: Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 6.2 USB Keyboard Support SMBIOS 3.1.1
Software: Super Doctor 5 Watch Dog NMI SUM IPMI 2.0, KVM with dedicated LAN
Power Configurations: ACPI Power Management Power-on mode control for AC power loss recovery
CPU: Monitors CPU Core Voltages, +1.8V, 3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory CPU switching voltage regulator
FAN: Fan status tachometer monitoringFan header Status monitor for speed control Pulse Width Modulated (PWM) fan connectors
Temperature: Monitoring for CPU and chassis environment CPU Thermal Trip Support Thermal control for Fan connectors I²C Temperature Sensing Logic
LED: CPU / System Overheat LED
Other Features: Chassis Intrusion Detection Chassis Intrusion Header
Environmental Specifications: Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)
