MBD-M11SDV-8CT-LN4F: M11SDV-8CT-LN4F
Form Factor: Mini-ITX
Dimensions: 6.7″ x 6.7″ (17cm x 17cm)
CPU: Single AMD EPYC™ 3201 SoC Processor
Cores: 8 Core/8 Thread
Memory Capacity: 4 DIMM slots Supports up to 512GB Registered ECC DDR4 2133MHz SDRAM in 4 DIMMs 2-channel memory bus
Memory Type: DDR4 2133 MHz Registered ECC, 288-pin gold-plated DIMMs
DIMM Sizes: 8GB, 16GB, 32GB, 64GB, 128GB
Memory Voltage: 1.2V
Error Detection: Corrects single-bit errors Detects double-bit errors (using ECC memory)
SATA: SATA3 (6 Gbps)
Network Controllers: 4x 1GbE with Intel® I350-AM41 Realtek RTL8211E PHY (dedicated IPMI)
IPMI: Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2500 BMC
VGA: ASPEED AST2500 BMC
SATA: 4 SATA3 (6 Gbps) ports
LAN: 4 RJ45 Gigabit Ethernet LAN ports 1 RJ45 Dedicated IPMI LAN port
USB: 2 USB 3.0 ports 6 USB 2.0 ports
VGA: 1 VGA port
Others: 1 COM port header 1 TPM 2.0 header
PCI-Express: 1 PCI-E 3.0 x16 slot
M.2: Interface: 1 PCI-E 3.0 x4 Form factor: 2280 Key: M-key
1U: SCE300 SCE301
BIOS Type: AMI 128Mb Flash EEPROM
Software: Super Doctor 5 Watch Dog NMI SUM IPMI 2.0, KVM with dedicated LAN
Power Configurations: ACPI Power Management Power-on mode control for AC power loss recovery
CPU: Monitors CPU Core Voltages, +1.8V, +3.3V, +12V CPU switching voltage regulator Supports system management utility VBAT
FAN: Up to 3 fan status tachometer monitoringUp to 3 4-pin fan headers Dual Cooling Zone Status monitor for speed control Pulse Width Modulated (PWM) fan connectors
Temperature: Monitoring for CPU and chassis environment CPU Thermal Trip Support Thermal control for 6x Fan connectors I²C Temperature Sensing Logic
LED: CPU / System Overheat LED
Other Features: UID
Environmental Specifications: Operating Temperature: 0°C to 60°C (32°F to 140°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)
