X10QBL-CT

MBD-X10QBL-CT: X10QBL-CT
Form Factor: Proprietary
Dimensions: 16.79″ x 16.4″ (42.65cm x 41.66cm)
CPU: Intel® Xeon® processor E7-8800 v3, Intel® Xeon® processor E7-8800 v4.Quad Socket R (LGA 2011) supported, CPU TDP support 165W TDP, 1 QPI up to 9.6GT/s
Cores / Cache: Up to 24 cores / Up to 60 MB cache
Memory Capacity: Up to 2TB 3DS ECC RDIMM, DDR3-1600MHz’ Up to 2TB 3DS ECC LRDIMM, DDR3-1600MHz, in 32 DIMM slots
Memory Type: 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes: 4GB, 8GB, 16GB, 32GB, 64GB
Memory Voltage: 1.35V, 1.5V
Error Detection: Corrects single-bit errorsDetects double-bit errors (using ECC memory)
Chipset: Intel® C602J
SATA: SATA2 (3 Gbps) RAID 0,1,5,10 SATA3 (6 Gbps) RAID 0,1JBOD support (IT Mode)
SAS: SAS3 (12Gbps) via Broadcom 3008 controller SW RAID 0, 1, 10 support
IPMI: Support for Intelligent Platform Management Interface v.2.0IPMI 2.0 with virtual media over LAN and KVM-over-LAN supportASPEED AST2400 BMC
Network Controllers: Dual LAN with Intel® X540 10GBase-T Ethernet ControllerX10QBL-CTSingle LAN with Virtual Machine Device Queues reduce I/O overheadSingle LAN with Supports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 outputSingle LAN with Realtek RTL8211E PHY (dedicated IPMI)
Graphics: Aspeed AST2400 BMC
SATA: 2 SATA3 (6Gbps) port4 SATA2 (3Gbps) ports
LAN: 2 RJ45 10GBase-T ports1 RJ45 Dedicated IPMI LAN port
USB: 6 USB 2.0 ports (3 rear + 2 headers + 1 Type A)
Video Output: 1 VGA port
Serial Port / Header: 2 COM Ports (1 rear, 1 header)
TPM: 1 TPM Header
PCI-E: 2 PCI-E 3.0 x16,2 PCI-E 3.0 x8,,
BIOS Type: 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features: Plug and Play (PnP)APM 1.2PCI 2.3ACPI 1.0 / 2.0 / 3.0 / 4.0USB Keyboard supportSMBIOS 2.7.1UEFI 2.3.1
Software: IPMI2.0, KVM with dedicated LAN, SPM, SUM, SuperDoctor® 5, Watchdog
Power Configurations: ACPI Power ManagementMain Switch Override MechanismCPU Fan auto-off in sleep modePower-on mode for AC power recovery
Voltage: +1.8V, +12V, +3.3V, +5V, +5V standby, 5 Phase-switching voltage regulator, Chipset Voltage, HT, Memory, Monitors for CPU Cores, VBAT
FAN: 8x 4-pin fan headers (up to 8 fans), 4x 9cm + 3x 8cm fans w/ speed control, Low noise fan speed control, Pulse Width Modulated (PWM) fan connectors, Status monitoring for on/off control
Temperature: Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Control for 8 Fan Connectors, I2C temperature sensing logic, Thermal Monitor 2 (TM2) support, PECI
LED: CPU / System Overheat LED
Other Features: Chassis intrusion detection, Chassis intrusion header, SDDC