X10SDV-6C-TLN4F

MBD-X10SDV-6C-TLN4F: X10SDV-6C-TLN4F
Form Factor: Mini-ITX
Dimensions: 6.7″ x 6.7″ (17.02cm x 17.02cm)
CPU: Intel® Xeon® Processor D-1528.Single Socket FCBGA1667 supported, CPU TDP support 35W
Cores / Cache: 6 cores, 12 threads / 9MB cache
Memory Capacity: Up to 128GB Registered ECC RDIMM, DDR4-2133MHzUp to 64GB Unbuffered ECC/non-ECC UDIMM, DDR4-2133MHz, in 4 DIMM slots
Memory Type: 2133/1866/1600MHz ECC DDR4 ECC RDIMM and ECC/Non-ECC UDIMM
DIMM Sizes: 4GB, 8GB, 16GB, 32GB
Memory Voltage: 1.2V
Error Detection: Corrects single-bit errors Detects double-bit errors (using ECC memory)
Chipset: System on Chip
SATA: SoC controller for 6 SATA3 (6 Gbps) ports’ RAID 0,1,5,10
IPMI: Support for Intelligent Platform Management Interface v.2.0IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Network Controllers: Dual LAN with Intel® Ethernet Controller I350-AM2Dual LAN with 10Gbase-TSingle LAN with Virtual Machine Device Queues reduce I/O overheadSingle LAN with Supports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 outputSingle LAN with 1 Realtek RTL8211E PHY (dedicated IPMI)
Graphics: Aspeed AST2400 BMC
SATA: 6 SATA3 (6Gbps) port
LAN: 2 RJ45 Gigabit Ethernet LAN ports2 RJ45 10GBase-T ports1 RJ45 Dedicated IPMI LAN port
USB: 4 USB 2.0 ports (4 headers,Type A))2 USB 3.0 ports (2 rear)
Video Output: 1 VGA port
Serial Port / Header: 1 COM Port (1 header)
TPM: TPM Header
PCI-E: 1 PCI-E 3.0 x16
M.2: 1 M.2 M-Key SATA/PCI-E 3.0 x4, 2242/2280
BIOS Type: 128Mb SPI Flash with AMI BIOS
BIOS Features: PCI 3.0ACPI 5.0USB Keyboard supportHardware BIOS Virus protectionRTC (Real Time Clock) WakeupSMBIOS 2.8UEFI 2.4
Software: Intel® Node Manager, IPMI (Intelligent Platform Management Interface) v2.0 with KVM support, IPMI2.0, KVM with dedicated LAN, NMI, SUM, SuperDoctor® 5, Watchdog
System Management Software: SUM
Power Configurations: ACPI Power ManagementControl of power-on for recovery from AC power lossCPU thermal trip support for processor protection
Voltage: +1.8V, +12V, +3.3V, +5V, 1.2V (VDIMM), 4 -fan status, 4 fans with tachometer monitoring, Chassis intrusion header, Memory, Memory Voltages, Monitors for CPU Cores, Supports system management utility, System level control, System temperature
FAN: 4x 4-pin fan headers (up to 4 fans), Dual Cooling Zone, Fan speed control, Low noise fan speed control, Overheat LED indication, Pulse Width Modulated (PWM) fan connectors, PWM fan speed control, Status monitoring for on/off control, Status monitoring for speed control, System level control, Thermal control tachometer fan connectors
Temperature: Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Monitor 2 (TM2) support, PECI
LED: CPU / System Overheat LED, UID/Remote UID
Other Features: 12V DC or ATX Power Source, 4-pin 12v DC power connector, ACPI power management, ATX Power connector, Chassis intrusion detection, Chassis intrusion header, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, Dual Cooling Zones, Hyper-Speed Technology hardware acceleration, M.2 NGFF connector, Node Manager Support, RoHS
Operating Temperature Range: 0°C ~ 60°C (32°F ~ 140°F)