X10SDV-8C-TLN4F+

MBD-X10SDV-8C-TLN4F+: X10SDV-8C-TLN4F+
Form Factor: Mini-ITX
Dimensions: 6.7″ x 6.7″ (17.02cm x 17.02cm)
CPU: Intel® Xeon® Processor D-1537. Socket FCBGA1667 supported, CPU TDP support 35W
Cores / Cache: 8 cores, 16 threads / 12MB cache
Memory Capacity: Up to 128GB Registered ECC RDIMM, DDR4-2133MHzUp to 64GB Unbuffered ECC/non-ECC UDIMM, DDR4-2133MHz, in 4 DIMM slots
Memory Type: 2133/1866/1600MHz ECC DDR4 ECC RDIMM and ECC/Non-ECC UDIMM
DIMM Sizes: 4GB, 8GB, 16GB, 32GB
Memory Voltage: 1.2V
Error Detection: Corrects single-bit errorsDetects double-bit errors (using ECC memory)
Chipset: System on Chip
SATA: SoC controller for 6 SATA3 (6 Gbps) ports’ RAID 0,1,5,10 RSTe
IPMI: Support for Intelligent Platform Management Interface v.2.0IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Network Controllers: Dual LAN with 10G SFP+ LAN via SoCDual LAN with 1GbE LAN via Intel® i350-AM2Single LAN with Virtual Machine Device Queues reduce I/O overheadSingle LAN with Supports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 outputSingle LAN with 1 Realtek RTL8211E PHY (dedicated IPMI)
Graphics: Aspeed AST2400 BMC
SATA: 6 SATA3 (6Gbps) port
LAN: 2 10G SFP+ LAN ports2 1GbE LAN ports1 RJ45 Dedicated IPMI LAN port
USB: 2 USB 2.0 ports (2 headers,Type A))2 USB 3.0 ports (2 rear)
Video Output: 1 VGA port
Serial Port / Header: 1 COM Port (1 header)
TPM: TPM Header
Others: GPIO and SMbus headers
PCI-E: 1 PCI-E 3.0 x16
M.2: M.2 Interface: 1 SATA/PCI-E 3.0 x4Form Factor: 2242, 2280Key: M-Key Support SATA devices
BIOS Type: 128Mb SPI Flash with AMI BIOS
BIOS Features: PCI 3.0ACPI 5.0USB Keyboard supportHardware BIOS Virus protectionRTC (Real Time Clock) WakeupSMBIOS 2.8UEFI 2.4
Software: Intel® Node Manager, IPMI2.0, KVM with dedicated LAN, NMI, SUM, SuperDoctor® 5, Watchdog
System Management Software: IPMIView for Linux/Windows IPMICFG SUM SuperDoctor 5
Power Configurations: ACPI Power ManagementMain Switch Override MechanismPower-on mode for AC power recovery
Voltage: +12V, +3.3V, +5V, 1.2V (VDIMM), Chassis intrusion header, System level control
FAN: 4x 4-pin fan headers (up to 4 fans), Dual Cooling Zone, Low noise fan speed control, Pulse Width Modulated (PWM) fan connectors, Status monitoring for on/off control, Status monitoring for speed control
Temperature: CPU thermal trip support, I2C temperature sensing logic, Monitoring for CPU and chassis environment, PECI
LED: CPU / System Overheat LED
Other Features: 12V DC or ATX Power Source, Chassis intrusion detection, Chassis intrusion header, RoHS
Operating Temperature Range: 0°C ~ 60°C (32°F ~ 140°F)
Non-Operating Temperature Range: -40°C — 85°C (-40°F — 185°F)
Operating Relative Humidity Range: 10% ~ 85% (non-condensing)
Non-Operating Relative Humidity Range: 10% ~ 95% (non-condensing)