Form Factor: ATX
Dimension: 12″ x 9.6″ (30.48cm x 24.38cm)
CPU: Intel® Xeon®E-2100 Processor, Intel® Xeon®E-2200 Processor, 8th/9th Generation Intel® Core™ i9/Core™ i7/Core™ i5/Core™ i3/Pentium®/Celeron® Processor Single Socket Socket H4 (LGA-1151) supported, CPU TDP supports Up to 95W TDP
Memory Capacity: 4 DIMM slots Up to 128GB Unbuffered ECC/non-ECC UDIMM, DDR4-2666MT/s
Memory Type: 2666/2400/2133/1866/1600 MT/s SDRAM 72-bit, 288-pin
DIMM Sizes: 2GB, 4GB, 8GB, 16GB, 32GB
Memory Voltage: 1.2V
Chipset: Intel® C246
SATA: Intel® C246 controller for 8 SATA3 (6 Gbps) ports’ RAID 0,1,5,10
IPMI: ASPEED AST2500
Audio: ALC 888S HD Audio
Graphics: 1 ASPEED AST2500 BMC port(s)
Network Controllers: Single LAN with Intel® PHY I219LM LAN controller Single LAN with Intel® Ethernet Controller I210-AT, Shared with IPMI
LAN: 2 1GbE LAN ports
USB: 2 USB 2.0 port(s) (2 via header) 4 USB 3.1 Gen1 port(s) (2 via header’ 2 rear type A) 4 USB 3.1 Gen2 port(s) (1 via header’ 1 rear type C’ 1 type A’ 1 rear type A)
Video Output: 1 VGA port(s), 1 DP (DisplayPort) port(s), 1 HDMI port(s), 1 DVI — D port(s)
Serial Port: 1 COMPort(s) (1 header)
DOM: 1 SATA DOM (Disk on Module) power connector support
TPM: 1 TPM Header
PCIe: 1 PCIe 3.0 x4, 1 PCIe 3.0 x1, 2 PCIex16 slots are running at NA/16, or 8/8 1 — 5V PCI 32bit
M.2: M.2 Interface: 2 PCIe 3.0 x4 Form Factor: 2242/2260/2280/22110 Key: M-Key
BIOS Type: 128MB UEFI
Software: SuperDoctor® 5, SUM, SSM, IPMI2.0, Watchdog
System Management Software: SuperDoctor 5, IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
Power Configurations: Power-on mode for AC power recovery, ACPI Power Management, ATX Power connector, Keyboard Wakeup from Soft-Off
Voltage: VBAT, Monitors CPU voltages, Chipset Voltage, Chassis intrusion header, 5 -fan status, +5V standby, +5V, +3.3V, +12V, +1.8V, Memory Voltages
LED: Standby alert LED
FAN: PWM fan speed control Low noise fan speed control Fan speed control 5 fans with tachometer status monitoring
Other Features: WOL, RoHS, CPU thermal trip support for processor protection, Control of power-on for recovery from AC power loss, Chassis intrusion header, Chassis intrusion detection, ATX Power connector, ACPI power management, 8-pin 12v DC power connector
Operating Temperature Range: 0°C — 50°C (32°F — 122°F)
Non-Operating Temperature Range: -20°C — 60°C (-4°F — 140°F)
Key Features
- 8th/9th Gen Intel® Core™ i9/i7/i5/i3, Pentium® and Celeron® Processors, Intel® Xeon® E-2100 Processors, Intel® Xeon® E-2200 Processors, Single LGA-1151 (Socket H4), Up to 95W TDP
- Intel® C246
-
- Single LAN with Intel® Ethernet Controller I210-AT
- Shared with IPMI
- Single LAN with Intel® PHY I219LM LAN controller
- Up to 128GB Unbuffered ECC/non-ECC UDIMM, DDR4-2666MHz, in 4 DIMM slots
-
- 1 PCIe 3.0 x4,
- 1 PCIe 3.0 x1,
- 2 PCIex16 slots are running at NA/16, or 8/8
- 1 — 5V PCI 32bit
- M.2 Interface: 2 PCIe 3.0 x4
- M.2 Form Factor: 2242/2260/2280/22110
- M.2 Key: M-Key
- M.2#1 is shared with PCIex4 slot, M.2#2 is shared with U.2
- U.2 Interface: 1 PCIe 3.0 x4
- Intel® C246 controller for 8 SATA3 (6 Gbps) ports’ RAID 0,1,5,10
-
- 1 HDMI port, 1 DVI — D port, 1 DP (DisplayPort) port, 1 VGA port,
- Intel UHD P630 graphic(For Xeon E-21xxG/E-22xxG series only)
Part Number | Qty | Description |
MCP-260-00122-0N | 1 | X11SCA Series IO Shield |
MCP-450-00005-0B or MCP-450-00006-0B | 2 | M.2 SSD Holder |
MNL-2087-QRG | 1 | X11SCA Series Quick Reference Guide |
CBL-0044L
|
6 | SATA3 Cable |