X11SCL-iF

Form Factor: Mini-ITX
Dimension: 6.7″ x 6.7″ (17.02cm x 17.02cm)
CPU: 8th/9th Generation Intel® Core™ i3/Pentium®/Celeron® Processor, Intel® Xeon®E-2100 Processor, Intel® Xeon®E-2200 Processor Single Socket Socket H4 (LGA-1151) supported, CPU TDP supports Up to 95W TDP
Core: Up to 6 cores, 12 threads
Note: BIOS version 1.0b or above is required to support Intel® Xeon® E-2200 and 9th Generation Intel® Core™ i3/Pentium®/Celeron® Processors
Memory Capacity: 2 DIMM slots Up to 64GB Unbuffered ECC UDIMM, DDR4-2666MT/s
Memory Type: 2667/2400/2133 MT/s SDRAM 72-bit,
DIMM Sizes: 4GB, 8GB, 16GB, 32GB
Memory Voltage: 1.2V
Error Detection: Corrects single-bit errors
Chipset: Intel® C242
SATA: Intel® C242 controller for 4 SATA3 (6 Gbps) ports’ RAID 0,1,5,10
IPMI: ASPEED AST2500
Graphics: 1 ASPEED AST2500 BMC port(s)
Network Controllers: Dual LAN with 1GbE with Intel® I210
USB: 4 USB 2.0 port(s) (2 via header’ 2 rear) 7 USB 3.2 Gen2 port(s) (2 via header’ 2 rear type A’ 2 rear’ 1 type A)
Video Output: 1 VGA port(s)
Serial Port: 1 COMPort(s) (1 rear)
DOM: 2 SATA DOM (Disk on Module) power connector support
TPM: 1 TPM Header
PCIe: 1 PCIe 3.0 x16 (in x16 slot)
M.2: M.2 Interface: 1 SATA/PCIe 3.0 x4 Form Factor: 2280 Key: M-Key
BIOS Type: 256MB UEFI
BIOS Features: ACPI 6.0 SMBIOS 2.7 Plug and Play (PnP) RTC (Real Time Clock) Wakeup UEFI 2.7 USB Keyboard support PCI 3.0
Software: SuperDoctor® 5, SUM, KVM with dedicated LAN, SSM, IPMI2.0, Watchdog
Power Configurations: Power-on mode for AC power recovery, ACPI Power Management
Voltage: VBAT, System level control, Supports system management utility, Monitors CPU voltages, Chipset Voltage, Chassis intrusion header, 4 -fan status, +5V standby, +5V, +3.3V, +12V, Memory Voltages
LED: UID/Remote UID CPU / System Overheat LED
Temperature: Monitoring for CPU and chassis environment CPU thermal trip support Thermal Monitor 2 (TM2) support PECI
FAN: 4x 4-pin fan headers (up to 4 fans) Thermal control tachometer fan connectors PWM fan speed control 4 fans with tachometer monitoring Overheat LED indication
Other Features: WOL, UID, M.2 NGFF connector, Dual Cooling Zones, CPU thermal trip support for processor protection, Control of power-on for recovery from AC power loss, Chassis intrusion header, Chassis intrusion detection, ACPI power management
Operating Temperature Range: 0°C — 50°C (32°F — 122°F)
Non-Operating Temperature Range: -40°C — 70°C (-40°F — 158°F)
Operating Relative Humidity Range: 8% — 90% (non-condensing)
Non Operating Relative Humidity Range: 5% — 95% (non-condensing)