X11SSN-H-VDC

Form Factor: 3.5″ SBC
Dimension: 5.7″ x 4″ (14.6cm x 10.16cm)
CPU: 7th Generation Intel® Core™ i7-7600U Processor Single Socket FCBGA-1356 supported, CPU TDP supports Up to 15W TDP
Core: Up to 2 cores, 4 threads / 4MB Cache
Memory Capacity: 2 DIMM slots Up to 32GB Unbuffered non-ECC SODIMM, DDR4-2133MT/s
Memory Type: non-ECC DDR4 SODIMM Unbuffered2133 SDRAM 72-bit, 260-pin gold-plated
DIMM Sizes: 4GB, 8GB, 16GB
Memory Voltage: 1.2V
Chipset: System on Chip
Audio: ALC 888S HD Audio
Graphics: 1 Intel® HD Graphics port(s)
Network Controllers: Single LAN with Intel® PHY I219LM LAN controller Single LAN with Intel® Ethernet Controller I210IT
SATA: 1 SATA3 (6Gbps) port(s)
LAN: 2 RJ45 Gigabit Ethernet LAN ports
USB: 1 USB 3.2 Gen2 port(s) (1 type C) 4 USB 2.0 port(s) (4 via header) 2 USB 3.0 port(s) (2 rear)
Video Output: 1 DP (DisplayPort) port(s), 1 HDMI port(s), 1 48-bit LVDS port(s)
Serial Port: 4 COMPort(s) (4 header)
TPM: 1 TPM Chip
Others: 1 HD Audio header Mic-in/Headphone-out (Audio only support at 0~60C) 1 8-bit GPIO header 1 SMBus header 1 System Fan 1 Speaker header
PCIe: 1 x Full size Mini-PCIe with mSATA(USB2.0 x 1,PCIe Gen3 x 1,SATA Gen3 x 1)
M.2: M.2 Interface: SATA’ PCIe 3.0 x2′ USB 2.0 Form Factor: 2242, 2280, 3042 Key: B-Key
BIOS Type: AMI UEFI
Software: SuperDoctor® 5, AMT, vPro, Watchdog
System Management Software: SuperDoctor 5
Power Configurations: ACPI Power Management, CPU thermal trip support for processor protection, Control of power-on for recovery from AC power loss, Force Power On by Jumper, +12V DC Power Input Vertical Type Connector
Voltage: VBAT, System temperature, System level control, 3.3V standby, 1.2V (VDIMM), +5V, +3.3V, +12V, Monitors for CPU Cores
LED: Standby alert LED
Temperature: CPU thermal trip support
FAN: 1x 4-pinfan header (up to 1 fan) Thermal control tachometer fan connectors System level control PWM fan speed control Low noise fan speed control Fan speed control
Other Features: WOL, System level control, RoHS, M.2 NGFF connector, CPU thermal trip support for processor protection, Control of power-on for recovery from AC power loss, ACPI power management, 4-pin 12v Vertical Type DC Power Connector
Operating Temperature Range: 0°C — 70°C (32°F — 158°F)
Non-Operating Temperature Range: -40°C — 85°C (-40°F — 185°F)
Operating Relative Humidity Range: 8% — 90% (non-condensing)
Non Operating Relative Humidity Range: 10% — 95% (non-condensing)