X12STH-SYS

Form Factor: Micro-ATX
Dimension: 9.6″ x 9.6″ (24.38cm x 24.38cm)
CPU: 10th Generation Intel® Pentium® Processor, Intel® Xeon®  E-2300 Processor Single Socket LGA-1200 (Socket H5) supported, CPU TDP supports Up to 95W TDP
Core: Up to 8 cores, 16 threads
Memory Capacity: 4 DIMM slots Up to 128GB Unbuffered ECC UDIMM, DDR4-3200MT/s
Memory Type: 3200/2933/2666 MT/s SDRAM
DIMM Sizes: 4GB, 8GB, 16GB, 32GB
Memory Voltage: 1.2V
Error Detection: Corrects single-bit errors
Chipset: Intel® C256
SATA: Intel® C256 controller for 8 SATA3 (6 Gbps) ports’ RAID 0,1,5,10
IPMI: ASPEED AST2600 BMC
Graphics: 1 ASPEED AST2600 BMC port(s)
Network Controllers: Dual LAN with Intel® Ethernet Controller I210
SATA: 8 SATA3 (6Gbps) port(s)
LAN: 2 RJ45 Gigabit Ethernet LAN ports
USB: 6 USB 2.0 port(s) (4 via header’ 2 rear) 5 USB 3.2 Gen1 port(s) (2 via header’ 2 rear’ 1 type A)
Video Output: 1 VGA port(s)
Serial Port: 2 COMPort(s) (1 header’ 1 rear)
DOM: 2 SATA DOM (Disk on Module) power connector support
TPM: 1 TPM Header
PCIe: 1 PCIe 3.0 x4 (in x8 slot),1 PCIe 4.0 x16
M.2: M.2 Interface: 1 PCIe 3.0 x4 Form Factor: 2280/22110 Key: M-Key
BIOS Type: 256MB UEFI
BIOS Features: ACPI 6.0 SMBIOS 2.7 Plug and Play (PnP) RTC (Real Time Clock) Wakeup UEFI 2.7 USB Keyboard support PCI 3.0
Software: Redfish API, Supermicro Server Manager (SSM), Supermicro Update Manager (SUM), Supermicro SuperDoctor® 5 (SD5), Super Diagnostics Offline (SDO), KVM with dedicated LAN , IPMI 2.0
System Management Software: IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
Power Configurations: Power-on mode for AC power recovery, ACPI Power Management
Voltage: VBAT, System level control, Supports system management utility, Monitors CPU voltages, Chipset Voltage, Chassis intrusion header, 6 -fan status, +5V standby, +5V, +3.3V, +12V, Memory Voltages
LED: UID/Remote UID CPU / System Overheat LED
Temperature: Monitoring for CPU and chassis environment CPU thermal trip support Thermal Monitor 2 (TM2) support PECI
FAN: 6x 4-pin fan headers (up to 6 fans) Thermal control tachometer fan connectors Fan speed control 6 fans with tachometer status monitoring Overheat LED indication
Other Features: WOL, UID, Node Manager Support, M.2 NGFF connector, Dual Cooling Zones, CPU thermal trip support for processor protection, Control of power-on for recovery from AC power loss, Chassis intrusion header, Chassis intrusion detection, ACPI power management
Operating Temperature Range: 0°C — 50°C (32°F — 122°F)
Non-Operating Temperature Range: -40°C — 70°C (-40°F — 158°F)
Operating Relative Humidity Range: 8% — 90% (non-condensing)
Non Operating Relative Humidity Range: 5% — 95% (non-condensing)